Nikkai A75HQ

(Our category: Set Top Box/TV Receiver Remote)

Replacement Remote Control. No setup is required. All you need to do is to insert two batteries and it is ready to use. Long battery life; remote goes into very low power sleep mode when not in use.

This remote works on the Nikkai A75HQ only.

You will be able to access the important setup menus and also;
  • epg (electronic programme guide)
  • fav
  • info
  • p size
  • recall - hold for list
  • subtitle

  • With the high VAT rate and cost of postage why not add a TV to this DTV remote and control the two things for a small amount more: 2-in-1

    We do have a Nikkai page where you can view all 3m remote controls for Freeview, Dtv, Freesat, Television and DVD. Guaranteed same business day postage right up to 5pm. See our feedback on ebay in corner below. 1st class post - small packet that will fit through your letterbox.

    Nikkai A75HQ

    Remote Control : Nikkai A75HQ

    Sold Out


    Notes on the functions:

    epg,electronic programme guide to show what is on now and later in the day - usually shows the next 7 days also

    recall - hold for list,go back to the last channel - hold down to bring up a list of channels

    0,zero number entry for channels 10 20 30 ..

    epg,electronic programme guide to show what is on now and later in the day - usually shows the next 7 days also

    text,Teletext equivalent to the Red on some TVs




    Single Scart Set Top Box
    User Manual
    A75HQ
    CONTENTS
    Page Important safety instructions Front and rear panel features Remote control features Using
     the remote control Connections Getting started Basic functions Using the on screen menus Main
     menu Channel Configuaration Factory Default Games Trouble shooting Connection to the mains su
    pply 2 3 4 5 6 7 8 12 12 13 17 21 21 22 23
    E-1
    IMPORTANT SAFETY INSTRUCTIONS
    RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER
    To reduce the risk of electric shock, do not remove the cover or back.No user serviceable part
    s inside this unit. Refer servicing to a qualified technician.
    The lightning flash with the arrowhead symbol,within an equilateral triangle, is intended to a
    lert the user to the presence of uninsulated 'dangerous voltage' within the products inclosure
    , that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation 
    point within an equilateral triangle, is intended to alert the user to the presence of importa
    nt operating and maintenance(servicing) instruction in the literature accompanying the applian
    ce.
    Caution: always read and observe all warnings and instructions given in the instruction manual
     and those marked on the unit. Read these instructions carefully and keep them in a safe place
    . Do not use this appliance near water. Clean only with a soft dry cloth. Only use attachments
    /accessories specified by the manufacturer. Unplug this unit during lightning storms or when n
    ot in use. Refer all servicing to a qualified service personnel. Servicing is required when th
    e appliance is damaged in anyway. This appliance shall not be exposed to dripping or splashing
     water. No object filled with liquids such as vases shall be placed on the appliance. Do not p
    lace naked flame sources such as candles on the appliance. Make sure all electrical connection
    s are properly made in accordance with the manufacturer's instructions. Switch off and unplug 
    from the mains before changing any connections. Make sure the mains cord is routed so that it 
    is not likely to be walked on, or subjected to water and heat. Should the power cord need repl
    acing, it must be replaced with a cord of the same type by aqualified technician. Do not obstr
    uct the vents which such things as newspapers, table cloths, curtains and so on. Do not operat
    e the appliance if you are in doubt about it working normally, or if it is damaged in any way.
     Make sure there is adequate ventilation space around the appliance, at least 10 cm at the sid
    es and on the top. Always unplug from the mains when not in use. The mains plug should not be 
    obstructed and remain readily accessible during intended use. The rating markings are located 
    on the base of the unit. Do not install this equipment in a confined or building-in space such
     as a book case or similar unit, and remain a well ventilation conditions. The ventilation sho
    uld not be impeded by covering the ventilation openings with items such as newspaper, table-cl
    othes curtains etc. WARNING: Please refer the information on exterior bottom enclosure for ele
    ctrical and safety information before installing or operating the apparatus. WARNING: To reduc
    e the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The ap
    paratus shall not be exposed to dripping or splashing and that objects filled with liquids, su
    ch as vases, shall not be replaced on apparatus. WARNING: The battery (battery or batteries or
     battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like. WARN
    ING: The mains plug is used as disconnect device, the disconnect device shall remain readily o
    perable.
    E-2
    FRONT AND REAR PANEL FEATURES
    E-3
    REMOTE CONTROL FEATURES
    Remote Control
    STANDBY
    Prev./Zoom+ Next./ZoomPROG. INFO
    w b U D D W t b b (
    bbDE-4
    USING THE REMOTE CONTROL
    Inserting the batteries in the remote control
    1 Open the battery compartment cover. 2 Insert 2 AAAbatteries into the battery compartment wit
    hthe polarity the same as marked inside the batterycompartmentin the remote control. 3 Replace
     the batterycover.
    Step 1 Step 2 Step 3
    Battery precautions- to prevent battery leakage that may result in damage to the unit, please 
    follow these instructions: 1. Install batteries correctly, with the polarity the same as marke
    d inside the battery compartment in the remote control. 2. Only batteries of the same or equiv
    alent type are to be us ed. 3. Use only the size and type of battery specified by the manufact
    urer. 4. If the unit is not used for a long period of time, remove the battery to prevent dama
    ge or injury from possible battery leakage. 5. Do not try to recharge batteries not intended t
    o be recharged, they can overheat and rupture (follow battery manufacturer instructions). 6. D
    ispose of batteries safely in accordance with your local authorities. Warning: when you are no
    t using the unit, always unplug from the mains supply. Do not leave the unit in Standby, or op
    erating when you leave the house.
    45° 45° Point the remote control directly at the remote sensor at no more than a 45° angle and
     a maximum distance of 6 metres.
    E-5
    CONNECTIONS
    General
    There are many different types of TV/Recording devices and other equipment that you can connec
    t to the Settop box. In this manual you will see some of the most common ways to connect your 
    equipment.
    Connection to the TV with scart
    Scart cable Antenna
    SCART-TV
    ANT IN
    LOOP OUT
    RF lead
    1 Connect the Antenna to the ANT IN socket on the re ar of the set top box. 2 Connect an RF le
    ad from the LOOP OUT socket on the rear of the set top box to the ANT In socket on the rear of
     the TV. 3 Connect a scart cable from the the TV SCART socket on the rear of the set top box t
    o the SCART socket on the rear of the TV.
    E-6
    GETTING STARTED
    Putting into operating
    Make sure that all the connections have been made before connecting to the mains supply. Plug 
    the STB into the mains supply and the STB will switch on.
    Init Install
    When the STB is first started from standby mode, there are no channels stored inside the memor
    y. An `Init Install' menu will be displayed. 1. Press the or button to select the OSD language
    .2. Press the the or
    button to highlight "Area" and button to select "England".
    3. Press the will appear.
    button and a confirmation message
    4. Press the the
    orbutton to select "Yes" and press
    button to start the channel searching.
    5. When the channel searching is finished successfully, the STB is ready to use.
    E-7
    BASIC FUNCTIONS
    TV/Radio Switch
    Press TV/Radio to switch between TV and Radio
    Station Switch
    · Press "ENTER" to switch to the quick select program list. · Press "VOL+ /VOL-" to select a d
    ifferent program class. · Press "CH+/CH-" to select the program. · Press "ENTER" to confirm pr
    ogram selection.
    · If there are some favourite programs that have been set up, press the "FAV" button to enter 
    into the favourite program list.
    · Press CH+/CH-" to select a favourite program, press "ENTER" to confirm the selection. · Pres
    s "EXIT" to return to the main menu.
    

    Terms of sale

    We have been in business since 1992. We also trade on ebay under the user name GenuineCopies:

    GenuineCopies (74221) Feedback